Are you looking for AT&T APN settings? If yes, then you have stumbled upon the right article.
An Access Point Name, or APN, is like a password that helps your phone connect to the internet using a cellular network.
A while back, I was constantly struggling with my AT&T internet connection on my smartphone. Web pages took ages to load, videos were always buffering, and sometimes, I couldn’t even check my emails.
It was incredibly frustrating, especially when I needed to work while on the move.
I didn’t know much about how cell phones connect to the internet until a friend mentioned something called an APN – Access Point Name.
He explained that it’s like a key your phone uses to access the mobile internet. Intrigued, I decided to dive deeper.
After some research, I found out that the APN settings on my phone were not configured correctly for my AT&T network.
This was the root of my connectivity issues! The settings were a bit complex, involving things like a specific name, a proxy, and other technical terms.
However, with some patience and careful following of instructions, I managed to input the correct APN settings.
To my relief, as soon as I updated these settings, there was a noticeable improvement. Web pages loaded quickly, streaming videos played smoothly, and I could send emails without any delays.
In this article, I will share the AT&T APN settings that worked for me, along with the best APN settings for Android, iPhone, and Windows phones.
So, without any further ado, let’s get started.
AT&T APN Typеs: Overview of different APN typеs and whеn to usе thеm
There are different APN settings on your phone available for AT&T dеvicеs. Each type is designed for a specific purpose and can be used in various situations.
Dеfault APN
This is the most commonly used type of APN setting for AT&T, and the APN setting is usually dеfault on most AT&T dеvicеs. It’s designed to balance internet speed and rеliability and should work to fix the AT&T Cellular Data Not Working issue.
MMS APN
This APN type sends and receives multimedia messages (MMS), such as picturеs and vidеos. If you have trouble sending or receiving MMS messages, switch to this type of APN.
WAP APN
This type of APN is for oldеr dеvicеs that do not support nеwеr and fastеr data nеtworks. It is slowеr and morе rеliablе than standard APN but helps older devices connect to the Intеrnеt.
Hipri APN
This type of APN has higher priority access. It’s often used for business or enterprise connections where constant, stable connectivity is crucial.
Emergency APN
Specifically for emergency services, this APN ensures connectivity during emergencies.
What are AT&T’s APN settings?
AT&T APN settings are rеquirеd to establish a connеction between your AT&T wireless network and the internet. You can check your APN sеttings in your phone’s mobile network sеttings.
Here are the best AT&T APN that you can use.
Name | AT&T |
APN |
NXTGENPHONE
|
Proxy | Not set |
Port | Not set |
Username | Not set |
Password | Not set |
Server | Not set |
MMSC |
http://mmsc.mobile.att.net
|
MMS Proxy |
proxy.mobile.att.net
|
MMS Port | 80 |
MCC | 310 |
MNC | 410 |
Authentication Type | None |
APN Type |
default,mms,supl,hipri
|
APN Protocol | IPv4/IPv6 |
Bearer | Unspecified |
AT&T APN Settings for Apple Devices
Below, you can find AT&T APN for different Apple devices like iPhone, Apple Watch, and iPad:
AT&T APN Settings for iPhone
On your iPhone and iOS device, go to Settings > Cellular > Cellular Data and enter the settings below. Use the same settings in the APN, LTE, and Hotspot sections.
You can also configure AT&T MMS settings and then restart your iPhone.
Note: AT&T APN is automatically configured on your iPhone; you only need to update it if nothing works.
Here are the AT&T APN configuration for Apple iPhone:
- Cellular Data
APN |
NXTGENPHONE or Phone
|
Username | (leave blank) |
Password | (leave blank) |
- LTE(Optional)
APN |
NXTGENPHONE or Phone
|
Username | (leave blank) |
Password | (leave blank) |
- MMS
APN |
NXTGENPHONE
|
Username | (leave blank) |
Password | (leave blank) |
MMSC |
http://mmsc.mobile.att.net
|
MMS Proxy |
proxy.mobile.att.net
|
MMS Message Size | 1048576 |
MMS UA Prof URL | (leave blank) |
AT&T APN Settings for iPad
For iPad with a SIM card, go to Settings > Cellular > Cellular Data Network and enter the following settings:
Cellular Data
|
APN |
NXTGENPHONE
|
Username | (leave blank) | |
Password | (leave blank) | |
LTE Setup (Optional)
|
APN | (leave blank) |
Username | (leave blank) | |
Password | (leave blank) | |
MMS
|
APN |
NXTGENPHONE
|
Username | (leave blank) | |
Password | (leave blank) | |
MMSC |
http://mmsc.mobile.att.net
|
|
MMS Proxy |
proxy.mobile.att.net
|
|
MMS Max Message Size | 1048576 | |
MMS UA Prof URL | (leave blank) |
Restart your iPad for the settings listed above to take effect.
AT&T APN Settings for Apple Watch
For Apple Watch on the AT&T network, on your iPhone, go to the Watch app > My Watch > Cellular Data > Cellular Data Settings and enter the settings below.
APN |
NXTGENPHONE
|
Username | (leave blank) |
Password | (leave blank) |
Leave all other sections blank.
AT&T APN Settings for Android Devices
You need the correct APN settings on your Android device to connect to the AT&T network. For example, APN Settings on Galaxy S8 AT&T are different than the other older devices.
For Android devices, go to Settings > Connections > Mobile networks > Access point name to enter and enable the new APN settings.
This setting may be under “Wireless & Internet” on Android, depending on your device manufacturer’s settings and Android version. You can find the location of the access point name for a specific device.
Below, you can find AT&T APN configuration for Android devices, including smartphones, tablets, and smartwatches.
AT&T APN Settings for Android Smartphone
Here are the AT&T APN for Android Smartphones:
Name |
NXTGENPHONE
|
APN |
NXTGENPHONE or Phone
|
Proxy | not set |
Port | not set |
Username | not set |
Password | not set |
Server | not set |
MMSC |
http://mmsc.mobile.att.net
|
MMS proxy |
proxy.mobile.att.net
|
MMS port | 80 |
MCC | 310 |
MNC | 410 |
Authentication type | None |
APN type |
default,mms,supl,hipri
|
APN Protocol | IPv4 |
Bearer | Unspecified |
AT&T APN Settings for Android Tablets
Here are the AT&T free Android Tablet APN configuration:
Name | AT&T |
APN |
NXTGENPHONE
|
Proxy | (leave blank) |
Port | (leave blank) |
Username | (leave blank) |
Password | (leave blank) |
Server | (leave blank) |
MMSC |
http://mmsc.mobile.att.net
|
MMS proxy |
proxy.mobile.att.net
|
MMS port | 80 |
MCC |
310 (or leave as default)
|
MNC |
410 (or leave as default)
|
Authentication type | (leave blank) |
APN type |
default,mms,supl
|
APN protocol | IPv4 |
APN roaming protocol | IPv4 |
Bearer | Unspecified |
MVNO type | None |
AT&T APN Settings for Android Smartwatches
Here are the AT&T APN for Android Smartwatches:
Name | AT&T |
APN |
NXTGENPHONE or Phone
|
Proxy | (leave blank) |
Port | (leave blank) |
Username | (leave blank) |
Password | (leave blank) |
Server | (leave blank) |
MMSC |
http://mmsc.mobile.att.net
|
MMS proxy |
proxy.mobile.att.net
|
MMS port | 80 |
MCC |
310 (or leave as default)
|
MNC |
410 (or leave as default)
|
Authentication type | (leave blank) |
APN type |
default,mms,supl
|
APN protocol | IPv4 |
APN roaming protocol | IPv4 |
Bearer | Unspecified |
MVNO type | None |
AT&T APN Settings for Android 5G (Standalone-capable) Phones
Here are the AT&T APN configuration for Android 5G (Standalone-capable) only Phones:
Name | NRPHONE |
APN | NRPHONE |
Proxy | Not set |
Port | Not set |
Username | Not set |
Password | Not set |
Server | Not set |
MMSC | Not set |
MMS proxy | Not set |
MMS port | Not set |
MCC | 310 |
MNC | 410 |
Authentication type | None |
APN type |
default,mms,supl,hipri, Fota
|
APN Protocol | Enabled |
Bearer | Unspecified |
Save and select NRPHONE as active APN, then reboot your device.
AT&T APN Settings for Android 5G (Capable) Phones
For Android devices with 5G Phones: Go to Settings > Connections > Mobile networks > Access point name and enable the APN settings below. You can find the APN location for a specific device.
Once there, you can either tap to reset settings to default or manually edit them.
Enter the settings below to configure the AT&T APN internet settings for your 5G device.
Here are the AT&T APN for Android 5G (Capable) phones:
Name | ENHANCEDPHONE |
APN |
ENHANCEDPHONE
|
Proxy | Not set |
Port | Not set |
Username | Not set |
Password | Not set |
Server | Not set |
MMSC |
http://mmsc.mobile.att.net: http://mmsc.mobile.att.net
|
MMS proxy |
proxy.mobile.att.net
|
MMS port | 80 |
MCC | 310 |
MNC | 410 |
Authentication type | None |
APN type |
default,mms,supl,hipri
|
APN Protocol | IPv4 |
Bearer | Unspecified |
Save and select ATT 5G as active APN, then reboot your device.
AT&T APN Settings for Windows Phones
On Windows Phone, go to Settings > Network & Wireless > Cellular & SIM Settings > Enable APN for Internet.
INTERNET APN
APN |
NXTGENPHONE
|
Username | Not set |
Password | Not set |
Proxy Server | Not set |
Proxy Port | Not set |
APN type | IPv4v6 |
MMS APN
APN |
NXTGENPHONE
|
Username | Not set |
Password | Not set |
WAP Gateway |
proxy.mobile.att.net
|
WAP Gateway Port | 80 |
MMSC |
http://mmsc.mobile.att.net
|
Maximum message size | 600k |
IP type | IPv4v6 |
How to Find Your APN Settings to Change Them?
Below are some steps to manually configure the AT&T APN on your device.
For Android Device
You can access the APN settings on your Android phone through the following process:
- Tap the Settings app.
- Tap Network & Internet or Mobile networks > Advanced > Access point name.
- Tap the three-dot menu and click on the New APN option or select an existing APN to change it.
For Apple Device
You can access your iPhone’s APN settings through the following process:
- Tap the Settings app.
- Select Cellular Network under Cellular > Cellular Data Options.
- You can tap Cellular data > Mobile data options > Mobile data network.
After accessing your phone’s APN settings page, you must enter the relevant details from your mobile operator.
If you can’t access APN settings on your phone, Contact AT&T’s customer support to unlock them.
AT&T 4G LTE APN Settings 2024
Here are the 4G LTE network APN settings for 2024 for AT&T.
Setting | Value |
Name |
NXTGENPHONE
|
APN |
NXTGENPHONE
|
Proxy | not set |
Port | not set |
Username | not set |
Password | not set |
Server | not set |
MMSC |
http://mmsc.mobile.att.net
|
MMS proxy |
proxy.mobile.att.net
|
MMS port | 80 |
MCC | 310 |
MNC | 410 |
Authentication type | None |
APN type |
default,mms,supl,hipri
|
APN Protocol | IPv4 |
Bearer | Unspecified |
FAQS
How do I access my AT&T internet settings?
To access AT&T internet settings on your phone:
- On Android: Go to Settings > Connections > Mobile Networks > Access Point Names. Edit or add the APN.
- On iPhone: Go to Settings > Cellular > Cellular Data Options > Cellular Data Network. Enter APN settings.
What is the APN for IOT AT&T?
APNs come in two different forms: public and private. Public APNs use dynamic IP addresses, while private APNs use static ones. Public APNs are the default option for SIM plans, so it’s easier for Internet of Things (IoT) devices to use public APNs to access the Internet. 4G/LTE devices use “m2m.com.attz” as a pre-assigned test APN, and 5G devices will use “213x. m2m.com”
How do I turn on cellular data on AT&T?
To turn on the cellular data AT&T, follow these steps:
- Go to Wireless data usage.
- Scroll down to the Enabled options and select Data Management.
- Turn data off or on for the device you want to control.
Why is my AT&T internet not setting up?
Check that the gateway’s power, broadband, and service lights are green. If the LED is not green, there may be a signal problem or other problem with your gateway. Unplug the power cord to restart your modem or gateway. Wait about two minutes and restart it.
Conclusion
Configuring your AT&T APN is essential to ensure your phone can connect to the Internet and use other data services. The AT&T APN configuration above is best suited for Android, iPhone, and Windows devices and is compatible with hotspots and other networks.
However, if you don’t want to continue with the settings, you can always select the “Reset” or “Set to Default” button to return to the default AT&T APN settings.
With that said, I am wrapping up this article; if you have any questions, feel free to ask in the comment sections.
Add Comment